5-2
3. Remove Food Basket (5) and platform
(6).
4. Disconnect the Gear Motor wires from
the High Limit Relay (7) and the UP &
DOWN Switch (8).
5. Disconnect Basket Lift connector arm
(9) by removing hex nut and washer
(10).
6
7
9
10
8
6. Remove Basket Lift Cam (11) by loos-
ening set screw (12).
On reassembly, make
sure that set screws is on
a flat on the motor shaft. Use Loctite
“Blue” to secure set screw threads.
7. Remove Motor (13) by removing four
hex bolts (14).
8. Assemble in reverse order.
11
12
13
14
broaster.com Manual #16501 7/06 rev 2/15
To Next Page
Loading...
