Brocade Communications Systems FastIron X Series Diagnostic Manual

Brocade FastIron, FCX, ICX, and TurboIron Diagnostic Reference 181
53-1002965-01
supportsave commands
8
The following supportsave commands are used to collect all relevant support information to a
remote TFTP server location.
supportsave
Syntax: supportsave [all | os | platform | l2 | l3 | custom | core] tftp_server_ IP tftp_ server's_
relative_ path_name [user_tag]
• all - Collects all supportsave related log files.
• os - Collects operating system (OS) related information.
• platform - Collects platform related information.
• l2 - Collects Layer 2 related information.
• l3 - Collects Layer 3 related information.
• custom - Executes all commands present in the default and custom commands list and sends
the output to the specified TFTP server address.
• core - Collects all core logs from one of the Brocade ICX 6450 units in the mixed stack.
• tftp_server_ IP - Specifies the IP address of the TFTP server.
• tftp_server's_ relative_ path_ name - Specifies the file path name of TFTP server relative to
TFTP server's default directory to dump supportsave logs. To specify the default directory itself,
use '/'.
• user_tag - Specifies the user tag to be added in the supportsave collected file name. Maximum
of 10 characters are allowed.
NOTE
Brocade recommends to use all option to collect complete logs.
To collect all supportsave related logs, enter the supportsave all command as shown in the
following example.
Brocade# supportsave all 10.37.2.40 fi/prince/supportsave
Supportsave started. This operation may take several minutes.
Press "A" to abort supportsave operation.
ICX6430-48P
Brocade#.***********************.................................................
.................................................................................
Supportsave completed in 10 seconds
To collect core logs from a Brocade ICX 6450 unit in a mixed stack, enter the supportsave core
command and specify the unit number from which core logs need to be collected as shown in the
following example. The unit number can take values from 1 through 8.
Brocade# supportsave core 10.70.41.42 / unit 2
Supportsave started. This operation may take several minutes.
Press "A" to abort supportsave operation.
ICX6610-24
Brocade#.***********************.................................................
.................................................................................
Supportsave completed in 132 seconds
supportsave show
Syntax: supportsave [show | cancel]

Brocade Communications Systems FastIron X Series Specifications

General

Brand	Brocade Communications Systems
Model	FastIron X Series
Category	Switch
Language	English