To Next Page

To Previous Page

180 Brocade FastIron, FCX, ICX, and TurboIron Diagnostic Reference

53-1002965-01

supportsave commands

• The supportsave command cannot be added to the custom commands list. Also, the

commands which change the CLI mode (exit, quit, end) and commands which restart the

router (switchover, reload, reload-yes) must not be added.

• Modifying the custom commands list using the supportsave add-cmd or supportsave del-cmd

commands is not allowed while the supportsave data collection is in progress.

• Time taken by the supportsave command depends on the commands present in the list.

• The supportsave command does not support collecting crash logs from standby units in a

mixed stack.

• The supportsave core command can collect core logs from one of the Brocade ICX 6450 units

in the mixed stack.

• User tags cannot be added when collecting core logs from Brocade ICX 6450 units in a mixed

stack.

• The supportsave all command will not collect core logs from Brocade ICX 6450 units in a mixed

stack.

Table 1 displays the individual Brocade FastIron devices and the supportsave commands they

support.

TABLE 1 Supported supportsave commands

supportsave commands Mixed stacking Brocade ICX 6430

Brocade ICX 6450

Brocade FastIron SX

Brocade ICX 6610

Brocade FCX

Brocade ICX 6610 Brocade ICX 6450

supportsave all Supported Supported Supported Supported

supportsave os Not supported Not supported Supported Not supported

supportsave core

Supported

1. The core option is supported on the Brocade ICX 6610 only when the Brocade ICX 6610 is part of a mixed

stack.

Supported Supported Not supported

supportsave l2 Supported Supported Supported Supported

supportsave l3 Supported Supported Supported Supported

supportsave custom Supported Supported Supported Supported

supportsave platform Supported Supported Supported Supported

supportsave show Supported Supported Supported Supported

supportsave cancel Supported Supported Supported Supported

supportsave

add_cust_cmd index