76 Brocade FastIron, FCX, ICX, and TurboIron Diagnostic Reference
53-1002965-01
SSH debug commands
4
SSH:ShtcpSend[0]: eSendComplete: the string length [640] !
SSH: Outgoing connection is ready
SSH: Data is ready to receive
ShtcpReceiveStatus[0]: the string length [16]
ShtcpSendStatus[0]: eSendComplete
SSH:ShtcpSend[0]: eSendComplete: the string length [16] !
ShtcpSendStatus[0]: eSendComplete
SSH: Outgoing connection is ready
SSH: Data is ready to receive
ShtcpReceiveStatus[0]: the string length [52]
SSH:ShtcpSend[0]: eSendComplete: the string length [104] !
ShtcpSendStatus[0]: eSendComplete
SSH: Outgoing connection is ready
SSH: Data is ready to receive
ShtcpReceiveStatus[0]: the string length [68]
SSH:ShtcpSend[0]: eSendComplete: the string length [68] !
ShtcpSendStatus[0]: eSendComplete
SSH: Outgoing connection is ready
SSH: Data is ready to receive
ShtcpReceiveStatus[0]: the string length [116]
SSH:ShtcpSend[0]: eSendComplete: the string length [36] !
ShtcpSendStatus[0]: eSendComplete
SSH: Outgoing connection is ready
SSH: Data is ready to receive
ShtcpReceiveStatus[0]: the string length [68]
SSH:ShtcpSend[0]: eSendComplete: the string length [52] !
ShtcpSendStatus[0]: eSendComplete
SSH: Outgoing connection is ready
SSH: Data is ready to receive
ShtcpReceiveStatus[0]: the string length [148]
SSH:ShtcpSend[0]: eSendComplete: the string length [36] !
SSH: Outgoing connection is ready
SSH: Data is ready to receive
ShtcpReceiveStatus[0]: the string length [68]
ShtcpSendStatus[0]: eSendComplete
SSH:ShtcpSend[0]: eSendComplete: the string length [36] !
SSH: Outgoing connection is ready
SSH: Data is ready to receive
ShtcpReceiveStatus[0]: the string length [52]
ShtcpSendStatus[0]: eSendComplete
SSH:send_scp_data_to_ssh_client:buf len: 18, Qlen:18, Qaddr:256cd7e0, Qdepth#1
SSH: ShListen event for SSH session[0].
SSH:ShtcpSend[0]: eSendComplete: the string length [36] !
To Next Page
Loading...
Need help?
General
