Brooks 8200 - Installation; Final Preparation of Compressor

8200 Compressor
Installation, Operation, and Service Instructions
Brooks Automation 8040353
Revision AA
4-1
4 Installation
Overview
This chapter provides complete installation procedures for the Brooks Automation
Product.
Chapter Contents
Compressor Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-2
Preparing the Compressor Input-Power Cable. . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-2
Cooling Water Requirements (Water-Cooled Compressors Only) . . . . . .4-4
Cooling Water: General Considerations. . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-5
Cooling Water: Flow and Pressure Requirements . . . . . . . . . . . . . . . . . . . .4-6
Cooling Water: Heat Load and Temperature Rise . . . . . . . . . . . . . . . . . . . .4-7
Final Preparation of Compressor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-8
Connecting the Compressor to the Cold Head . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-9