Brooks 8200 - Safety

8200 Compressor
Installation, Operation, and Service Instructions
Brooks Automation 8040353
Revision AA
2-1
2 Safety
Overview
This section describes safety conventions for the Brooks Automation Product. All
personnel involved in the operation or maintenance of the product must be familiar
with the safety precautions outlined in this section.
NOTE: These safety recommendations are basic guidelines. If the facility where the Prod-
uct is installed has additional safety guidelines they should be followed as well,
along with the applicable national and international safety codes.
Chapter Contents
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-2
Signal Word Descriptions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-3
Safety Shape Descriptions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-4
References . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-4