Brother DreamWeaver„ VQ3000 User Manual

SEWING THE STITCHES
S-36
■ Piecing
Sewing two pieces of fabric together is called
piecing. When cutting pieces for quilt blocks, make
sure the seam allowance is 6.5 mm (approx.
1/4 inch).
a
Select or and attach presser foot
“J”.
b
Align the edge of the fabric with the edge of
the presser foot, and start sewing.
* To sew a 6.5 mm (approx. 1/4 inch) seam allowance
along the right edge of the presser foot with
selected, the width should be set to 5.50 mm
(approx. 7/32 inch).
a 6.5 mm (approx. 1/4 inch)
* To sew a 6.5 mm (approx. 1/4 inch) seam allowance
along the left edge of the presser foot with
selected, the width should be set to 1.50 mm
(approx. 1/32 inch).
a 6.5 mm (approx. 1/4 inch)
* To change the needle position, use or in
the width display.
Rick-rack stitch
Decorative stitch
Decorative stitch
Hemstitching
Hemstitching
Single diamond
overcast
Overcasting stitch
Piecing stitch (Right)
Piecing stitch (Middle)
Piecing stitch (Left)
Hand-look quilting
Quilting appliqué zigzag stitch
Quilting appliqué stitch
Quilting stippling
Memo
• When a stitch pattern in the Quilting
Stitches category (Q-02 through Q-30) is
selected, a finer stitch width can be set than
is available with stitch patterns in other
categories.
For example: Stitch Q-03 has 57 needle
positions and stitch Q-19 has 29 width
selections.
Stitch Stitch name
Presser foot
Note
• The width range of stitch setting is only
available in the Quilting stitch “Q” quilting
category.

Brother DreamWeaver„ VQ3000 Specifications

General

Brand	Brother
Model	DreamWeaver„ VQ3000
Category	Sewing Machine
Language	English