ENTERING STITCH DATA
MY CUSTOM STITCH
Sewing S-107
S
4
f
Use to move to the second point
and press .
g
Repeat the steps above for each point that
you have drawn on the grid sheet until the
stitch design is drawn on the screen as a
continuous line.
* Press to delete a selected point entered.
* Press to sew a test-run of the stitch.
* Press to return to the original screen.
* Press to view an image of the stitch.
■ Moving a Point
a
Press or to move to the point
that you want to move.
* To move to the first point, press .
* To move to the last point, press .
* You can also move by using the touch pen.
• If you have entered points that are too close
together, the fabric may not feed properly.
Edit the stitch data to leave a larger space
between points.
• If the stitch design is to be repeated and
linked, make sure that linking stitches are
added so that the stitch designs will not
overlap.
a Linking stitches
• You can touch on the grid sheet to set the
point, or you can also use a USB mouse.
To Next Page
Loading...
Need help?
General
