SELECTING STITCH PATTERNS
S-80
■ Adjusting the Character Spacing
The space between the characters can be adjusted.
a
Press .
* Press to display on the screen.
→ The character spacing window appears.
b
Press or to adjust character spacing.
* Press to increase the character spacing and
press to decrease the character spacing.
Example:
* Each setting equals a specific distance between
characters.
Value mm
00
10.18
20.36
30.54
40.72
50.9
61.08
71.26
81.44
91.62
10 1.8
• The default setting is “0”. No number less
than “0” can be set.
• Changing character spacing by this
method, pertains to all characters. Spacing
changes are valid not only while entering
characters but also before and after the
entering of characters.
To Next Page
Loading...
Need help?
General
