Brother GT-3 Series - Page 133

6. Replacing Parts
5.
Move backwa
rd the Platen and unscrew the four Screws (8) to remove the Tray Support Plate R (9) and
the Tray Support Plate L (10).
(10
)
GT-3 Series
124
6. Unscrew the four Screws (11) and remove the Bellows Guide Plate R (12) and the Bellows Guide Plate L
(13).
7. Unscrew the four Screws (14) and remove the Bellows (15) and two Bellows Setting Plates (16).
(12)
(13)
(11)
(16)
(14)
(14)
(16)
(15)
(9)
(8)
(13)
(12)
(11)