Brother GT-3 Series - Page 186

6. Replacing Parts
12.
Insert the p
rojection of the right side of the Wiper Blade Assy (6) by sliding the inside of the Wiper Drive
Plate.
<Note> Do not stretch the Wiper Drive Plate by force, it may be damaged.
Rubber Blade side
(6)
Rubber Blade side
Wi
p
er Drive Plate in the ri
g
ht side
13.
Make
sure that the projections of both sides are inserted properly to the oval holes on the Wiper Drive
Plate.
14. Mount the Wi
per Cleaner.
0066Y
15. Close the Front Cover and turn ON the printer.
<Note>
If an abnormal sound is emitted or some errors appear when you turn ON the printer, there is a possibility
that the Wiper Blade and the Wiper Cleaner may be touching. Confirm the positions and the situation that
the Wiper Cleaner is properly mounted.
GT-3 Series
177