Brother GT-3 Series - Page 188

6. Replacing Parts
5.
Cut the Band
(4) with the nippers and remove the Pump Tube (3) from the T Plug (5).
(3)
(5)
(4)
6.
Remove the t
wo Screws (7) that fix the Pump Rotor Holder (6).
(7)
(6)
(3)
(5)
7.
Remove the
Pump Rotor Holder (6) by lifting the left edge to your side by 2mm.
(3)
(5)
(6)
GT-3 Series
179