Brother GT-3 Series - Page 189

6. Replacing Parts
8.
Pull out the Pump Tub
e (3).
(3)
9. Insert the n
ew Pump Tube (9) in the U-shaped groove.
(9)
10.
Apply some g
rease (SB3229001GREASE EM-30L) slightly to the new Pump Tube (9), 30-140mm long
from the edge of the Band, approx 0.3 gram. Take care not to apply too much grease.
30
mm
140
mm
GT-3 Series
180