Brother GT-3 Series - Page 190

6. Replacing Parts
11.
Slide the Pump Roto
r Holder (6) from the left side to the right side of the Pump Housing (10) and push
down until it clicks.
(6)
(10)
12. Fix the Pump Rotor
Holder (6) with the two Screws (7) with tightening torque 0.3 N·m. Do not push the
Pump Rotor Holder to the right side.
(6)
(8)
(7)
13. Insert the Pu
mp Tube (3) to the T Plug (5). Bind it with the Band (4) not to slip the Pump Tube from the T
Plug (5).
(5)
(4)
(3)
GT-3 Series
181