6. Replacing Parts
GT-3 Series
269
4. Remove the Filter Cartridge (7).
5. Hold the Needle from the back, as shown in the photos below. Remove the Nut 8 (5) and remove the
Washer Plain S 8 (6).
<Note> Watch your fingers when you insert your hand to the Needle Bracket; the tip of the Needle is
really sharp and easy to get injured.
6. Slide back the Needle to the Ink Cartridge Holder and remove the Needle from the Needle Bracket (8).
(7)
(5)
(6)
(8)
(8)
To Next Page
Loading...
