Brother GT-3 Series - Page 305

6. Replacing Parts
3.
Hold the Spa
cer M3-30 with the Open ended spanner: M3 (5.5 mm), and fix it with the four screws (5)
with tightening torque 0.8 N·m.
(5)
4. Tighten the t
wo screws (6) with tightening torque 0.5 N·m, and mount the Cap Felt (7) facing to the bent
portion of the CL Guide Lower (position A).
(A)
(7)
(6)
5.
Fix the Wa
ste Ink Tube 1 (8) to the Ink Tray (1) with the Band (9) to the end, less than 1 mm margin from
the root.
(1)
(9)
(8)
GT-3 Series
296