Brother GT-3 Series - Page 307

6. Replacing Parts
9.
Pass th
e Pump Tube (15) through the notched groove (B).
(15)
(B)
(15)
10. Mount the Pu
mp Holder on the Frame and fix it with the right/left screws (17), with tightening torque 1.5
N·m.
(17)
(17)
11.
Mount the Ma
intenance Unit on the printer. (Refer to “6-1-16. Assembling/Disassembling of the
Maintenance Unit”.)
GT-3 Series
298