Brother GT-3 Series - Page 328

6. Replacing Parts
4.
Remove all th
e cables that connect to the Main PCB (5).
How to connect/disconnect CN9, 12 Connectors
Remove the FFC (6) by pulling the “black plastic claws” at the same time, and then the lock is unlocked.
CN3
CN4
CN1
CN9
GT-3 Series
319
Connect the FFC by inserting the FFC first and then
pushing the “black plastic claws” together to lock.
<Note>
・ Never make the contact area (metal) damaged or
wasted with grease.
・ Do not touch the contact area (metal) with your fingers.
(6)
CN11
CN12
CN14
(6)
(5)
CN15
CN6
CN10
CN7
CN8