Brother GT-3 Series - Page 353

6. Replacing Parts
4.
Remove the t
wo FFC Connectors that are connected to the Main PCB Assy.
<Note>
Refer to the section “The mechanism of CN9 and CN12 Connectors” in “6-2-7. Main PCB Assy” when
you handle the FFC Connectors.
Ass
e
mbling
<Note>
Refer to the section “The mechanism of CN9 and CN12 Connectors” in “6-2-7. Main PCB Assy”, and “How to
connect/disconnect the FFC Connector” in “6-2-18. Carriage PCB Assy” when you handle the FFC
Connectors.
GT-3 Series
344
2. The Length of FFC until folding
( ) position
: 210 mm
: 260 mm
3. Fold the FFC not to give too much
tension to Connectors.
1. Connect the FFC Connectors to
CN9 and CN23 on the Main PCB.