USING MFC REMOTE SETUP 5 - 1
5
MFC Remote Setup
The MFC Remote Setup application lets you configure many MFC
settings from a Windows
®
application. When you access this
application, the settings on your machine will be downloaded to your
PC and displayed on your computer screen. If you change the
settings, you can upload them directly to the machine.
From the Start menu, select Programs, Brother, MFL-Pro Suite
MFC-XXXX, and then select MFC Remote Setup. (Where XXXX is
your model name.)
OK button
When you click OK, the process of uploading the data to the machine
begins. The MFC Remote Setup program is closed if an error
message is displayed, enter the correct data again and then click
OK.
Cancel button
The Cancel button clears your changes and exits the MFC Remote
Setup application without uploading any data to the machine.
Using MFC Remote Setup
(For Windows
®
)
You can't use the MFC Remote Setup application if your
machine is connected via a Network. (For MFC-3320CN and
MFC-3820CN Only) (See Network User’s Guide.)
To Next Page
Loading...
Need help?
General
