Brother MFC-3220C Software Guide

8 - 8 NETWORK SCANNING (MFC-3320CN AND MFC-3820CN ONLY)
Scan to OCR
When you select Scan to OCR your original will be scanned and sent
directly to the PC you designated on your network. The Brother
SmartUI will activate ScanSoft
®
TextBridge
®
and convert your
original into text for viewing and editing from a word processing
application on the designated PC. You can change the
Scan
configuration.
(For Windows
®
98/Me/2000: See Scan to OCR (Word Processor) on
page 3-12 to 3-13.) (For Windows
®
XP: See
Hardware Section:
Changing the Scan to button configuration
on page 4-5 to 4-11.)
1
Load your original.
2
Press (
Scan
).
3
Press or to select
Scan
to OCR
.
Press
Menu/Set
.
4
Press or to select the destination PC you want to send
to.
Press
Menu/Set
.
If the LCD prompts you to enter a PIN Number, enter the 4-digit
PIN Number for the destination PC on the control panel.
Press
Black Start
or
Color Start
.
The machine will start the scanning process.
For Network Scanning the Brother Control Center (SmartUI)
selections are used only for configuring the Scan button. You
will not be able to initiate a network scan from the Brother
Control Center (SmartUI).
Scan to OCR

Brother MFC-3220C Specifications

General

Brand	Brother
Model	MFC-3220C
Category	All in One Printer
Language	English