Brother MFC-3220C Software Guide

USING THE BROTHER CONTROL CENTER 3 - 14
Scan to Image
To access Scan to Image Configurations screen
1
Load your original in the ADF. The Brother Control Center
screen will pop up.
2
Right-click the graphic application button and click on
Configuration. Click the Modify Settings button to view the
configuration screen of the Control Center.
3
To save your settings, click OK.
—OR—
To go back to the factory default settings, click the Restore
Defaults button.

Brother MFC-3220C Specifications

General

Brand	Brother
Model	MFC-3220C
Category	All in One Printer
Language	English