USING BROTHER PC-FAX SOFTWARE 6 - 27
Additional Information for Network
PC-FAX users with MFC-3320CN and
MFC-3820CN
Enable Network PC-FAX
(MFC-3320CN and MFC-3820CN only)
To use the machine with Network PC-FAX, the MFC must be
configured with a TCP/IP address. If you use PC-FAX to an E-mail
address, the mail server settings must also be configured.
The items described in this chapter are specific items relating to
the Network version of PC-FAX software.
Brother Network PC-FAX can be configured through the
PC-FAX Setup, Sending tab.
To Next Page
Loading...
Need help?
General
