How to fix 'CHECK CARTRIDGE' error on Brother MFC-5100C All in One Printer?
If your Brother All in One Printer shows 'CHECK CARTRIDGE', it indicates that an ink cartridge is not installed correctly. To fix this, re-install the ink cartridge, ensuring it is properly seated.
What to do if my Brother MFC-5100C All in One Printer has a paper jam?
If the recording paper is jammed in your Brother All in One Printer, remove the jammed paper, checking all areas where paper might be stuck.
What does 'NEAR EMPTY XXXX' mean on my Brother All in One Printer?
If your Brother All in One Printer displays 'NEAR EMPTY XXXX', it means one or more ink cartridges are running low. Order a new ink cartridge now.
What to do if my Brother All in One Printer says 'CHECK PAPER'?
If your Brother All in One Printer displays 'CHECK PAPER', it means the printer is out of paper. Add paper to the printer, then press the Mono Fax Start button.
Why is my Brother All in One Printer printing too dark or too light?
If the print quality from your Brother All in One Printer is too dark or too light, ensure your ink cartridges are fresh and not expired. Verify that the printer driver matches the type of paper you're using and consider using recommended special paper. Also, make sure that the environment for the machine is between 20 °C to 33 °C.
Why is my Brother MFC-5100C All in One Printer printing with poor quality?
If your Brother All in One Printer is producing poor quality prints, ensure the printer driver matches the type of paper you are using. If you are using plain paper, try using recommended special paper. Don’t handle the paper until the ink is dry. Adjust the Vertical Alignment.
How to fix 'COMM.ERROR' on Brother All in One Printer?
If your Brother All in One Printer displays 'COMM.ERROR', it means poor phone line quality caused a communication error. Try the call again. If the problem continues, call your telephone company to check your phone line.
How to fix white lines in text or graphics from Brother MFC-5100C?
If you notice white lines in text or graphics printed by your Brother All in One Printer, clean the print heads.
How to fix 'INK EMPTY XXXX' on Brother All in One Printer?
If your Brother All in One Printer displays 'INK EMPTY XXXX', it means one or more ink cartridges are empty and need replacing. Replace the ink cartridges to resolve this issue.
How to fix 'CHECK PAPER SIZE' error on Brother MFC-5100C All in One Printer?
If your Brother All in One Printer displays 'CHECK PAPER SIZE', your paper is smaller than A4 size. Reload A4 paper, and then press Mono Fax Start.
General| Brand | Brother |
|---|---|
| Model | MFC-5100C |
| Category | All in One Printer |
| Language | English |
Access instant answers and product information via fax.
Access online resources for support and troubleshooting.
Contact numbers for Brother customer service in USA and Canada.
Guidance on using the manual and understanding the control panel.
Items included and guidelines for MFC placement.
Crucial safety precautions for using the MFC.
Steps for installing ink cartridges and connecting cables.
How to configure fax receiving modes and ring delay.
Instructions for sending faxes, including basic and advanced options.
How to make single, multiple, and special copies.
Features and driver settings for using the MFC as a printer.
Detailed configuration options for the printer driver.
Using PC software for scanning, copying, and PC faxing.
Document management and OCR software usage.
Configuring and sending faxes using the PC.
Using the MFC with Apple Macintosh computers.
Solutions for common error messages and paper jams.
Steps for cleaning print heads and resolving print quality issues.
Cleaning procedures for the scanner and printer platen.
Step-by-step guide for replacing ink cartridges.
Technical details of the MFC's fax capabilities.
Technical details of printer functions and system requirements.
Definitions of technical terms used in the manual.
To Next Page
