9 - 5 MAKING COPIES
Increasing copy speed or quality
You can select the copy quality. The default setting is Normal.
1
Press (Copy) to illuminate it in green.
2
Load your document.
3
Use the dial pad to enter the number of copies you want
(up to 99).
4
Press Copy Options and ▲ or ▼ to select Quality.
5
Press ▲ or ▼ to choose the copy quality (Fast, Normal or
Best).
Press
Menu/Set.
6
Press Mono Start or Colour Start.
Normal Recommended mode for ordinary printouts. Good
copy quality with adequate copy speed.
Fast Fast copy speed and lowest ink consumption. Use
FAST to save time (document to be proof-read, large
documents or many copies).
Best Use this mode to copy precise images such as
photographs. BEST uses the highest resolution and
slowest speed.
To Next Page
Loading...
Need help?
General
