REMOTE FAX OPTIONS (MONOCHROME ONLY) 6 - 1
6
Setting up Fax Forwarding
When you select Fax Forward, your machine stores the received fax
in the memory. The machine will then dial the fax number you’ve
programmed and forward the fax message.
1
Press Menu/Set, 2, 5, 1.
2
Press ▲ or ▼ to select Fax Forward.
Press
Menu/Set.
The LCD will ask you to enter the fax number to which faxes will
be forwarded.
3
Enter the forwarding number (up to 20 digits).
Press
Menu/Set.
4
Press ▲ or ▼ to select Backup
Print:On or Backup Print:Off.
Press
Menu/Set.
5
Press Stop/Exit.
Remote Fax Options
(Monochrome only)
■ If you select Backup Print:On, the machine will also print
the fax at your machine so you will have a copy. This is a
safety feature in case there is a power failure before the fax
is forwarded or a problem at the receiving machine. The
machine can store faxes up to 24 hours if there is a power
failure.
■ If Fax forwarding is turned on your machine can not receive
a colour fax unless the sending machine converts it to
monochrome.
Fax Forward
Backup Print:On
To Next Page
Loading...
Need help?
General
