Brother MFC-640CW User Manual

INTRODUCTION 1 - 2
Control panel overview
1
TAD keys
On/Off
Lets you activate the TAD
(Telephone Answering Device) and
will blink if you have new messages.
Play/Record
Lets you listen to voice messages
stored in memory. Also, lets you
record telephone calls.
Erase
Lets you delete voice messages, all
fax messages or all messages.
2
Telephone keys
Microphone
Picks up your voice when you speak to
another party using Speaker Phone.
Speaker Phone
Lets you speak to another party by
using the machines microphone
and monitor.
Redial/Pause
Redials the last number you called.
It also inserts a pause in quick dial
numbers.
Hold/Recall
Lets you place calls on hold.
Also, use this key to gain access to an
outside line (for Australia and New
Zealand only) and/or to recall the
operator or transfer a call to another
extension when it is connected to a PBX.
3
Ink Management
Lets you clean the print head, check
the print quality, and check the
available ink volume.
4
Dial Pad
Use these keys to dial telephone and
fax numbers and as a keyboard for
entering information into the machine.
The # key lets you temporarily
switch the dialling mode during a
telephone call from Pulse to Tone.
(Not available in New Zealand)
5
Mode keys:
PhotoCapture
Lets you access the PhotoCapture
Center
™
mode.
Copy
Lets you access Copy mode.
Fax
Lets you access Fax mode.
Scan
Lets you access Scan mode.

Brother MFC-640CW Specifications

General

Brand	Brother
Model	MFC-640CW
Category	Fax Machine
Language	English