GETTING STARTED 2 - 3
Setting the Phone Line Type
(For Australia and New Zealand only)
If you are connecting the machine to a line that features a PBX or
ISDN to send and receive faxes, it is also necessary to change the
Phone Line Type accordingly by completing the following steps.
1
Press Menu/Set, 0, 6.
2
Press ▲ or ▼ to select PBX, ISDN (or Normal).
Press
Menu/Set.
3
Press Stop/Exit.
PBX and TRANSFER
The machine is initially set to be connected with PSTN (Public
Switched Telephone Network) lines. However, many offices use a
central telephone system or Private Automatic Branch Exchange.
Your machine can be connected to most types of PBX. The
machine’s recall feature supports timed break recall only (TBR). TBR
will work with most PBX systems allowing you to gain access to an
outside line, or transfer calls to another extension. The feature works
when the
Hold/Recall key is pressed.
You can program a Hold/Recall key press as part of a number
stored in a Speed-Dial location. When programming the
Speed-Dial number (
Menu/Set, 2, 3, 1) press Hold/Recall
first (the screen displays ”!”), then enter the telephone number.
If you do this, you do not need to press
Hold/Recall each time
before you dial using a Speed-Dial location. (See Storing
numbers for easy dialling on page 5-1.) However, if PBX is not
selected in the Phone Line Type setting, you cannot use the
Speed-Dial number that
Hold/Recall press is programmed
into.
To Next Page
Loading...
Need help?
General
