SETUP SEND 3 - 15
Memory Security
Memory Security lets you prevent unauthorized access to the
machine. While Memory Security is On the following operations are
available:
■ Receiving faxes into memory (limited by memory capacity)
■ Fax Forwarding (If Fax Forwarding was already On)
■ Remote Retrieval (If Fax Storage was already On)
■ Recording incoming messages (if TAD mode was already On)
While Memory Security is On the following operations are NOT
available:
■ Telephone (voice) operation with Speaker Phone
■ Sending faxes
■ Printing received faxes
■ Copying
■ PC printing
■ Scanning
■ PhotoCapture
You will not be able to continue to schedule Delayed Faxes or
Polling jobs. However, any pre-scheduled Delayed Faxes will be
sent when you turn Memory Security On, so they won’t be lost.
If you have selected Fax Forwarding or Fax Storage
(
Menu/Set, 2, 5, 1) before you turn Memory Security On, then
Fax Forwarding and Remote Retrieval will continue to work.
To print the faxes in memory, turn Memory Security Off.
You cannot turn on Memory Security if PC-Fax Receive is on.
(See Turning off Remote Fax Options on page 6-4.)
To Next Page
Loading...
Need help?
General
