2 - 4 GETTING STARTED
General Setup
Setting the Mode Timer
The machine has four temporary mode keys on the control panel:
PhotoCapture, Copy, Fax and Scan. You can change the number of
seconds or minutes the machine takes after the last Copy, Scan or
PhotoCapture operation before it returns to Fax mode. If you select
Off, the machine stays in the mode you used last.
1
Press Menu/Set, 1, 1.
2
Press ▲ or ▼ to select 0 Sec, 30 Secs, 1 Min, 2 Mins, 5 Mins
or Off.
Press
Menu/Set.
3
Press Stop/Exit.
To Next Page
Loading...
Need help?
General
