SETUP RECEIVE 4 - 10
Setup for Polling Receive with Secure Code
You need to make sure you are using the same secure code as the
other party.
1
If it is not illuminated in green, press (Fax).
2
Press Menu/Set, 2, 1, 7.
3
Press ▲ or ▼ to select Secure.
Press
Menu/Set.
4
Enter a four-digit secure code.
This is the same as the security code of the fax machine you are
polling.
Press
Menu/Set.
5
Enter the fax number you are polling.
6
Press Mono Start or Colour Start.
Setup Delayed Polling Receive
You can set the machine to begin Polling Receive at a later time.
1
If it is not illuminated in green, press (Fax).
2
Press Menu/Set, 2, 1, 7.
3
Press ▲ or ▼ to select Timer.
Press
Menu/Set.
4
Enter the time (in 24-hour format) you want to begin polling.
For example, enter 21:45 for 9:45 PM.
Press
Menu/Set.
5
Enter the fax number you are polling.
Press
Mono Start or Colour Start.
The machine makes the polling call at the time you entered.
If the other fax machine that you are calling has not been set up
for polling, you will receive the message “Connection Fail”.
You can set up only one Delayed Polling.
To Next Page
Loading...
Need help?
General
