10 - 14 WALK-UP PHOTOCAPTURE CENTER
™
5
Press ▲ or ▼ to select the quality you want.
To change the file type, press
Menu/Set and go to Step 6.
—OR—
To start scanning, press
Mono Start or Colour Start.
6
Press ▲ or ▼ to select the file type you want.
To change the file name, press
Menu/Set and go to Step 7.
—OR—
To start scanning, press
Mono Start or Colour Start.
7
The file name is set automatically however, you can set a name
of your choice using the dial pad. You can only change the first
6 digits.
Press
Mono Start or Colour Start to start scanning.
Changing the default quality
1
Press Menu/Set, 4, 8, 1.
2
Press ▲ or ▼ to select B/W 200x100 dpi, B/W 200 dpi,
Color 150 dpi, Color 300 dpi or Color 600 dpi.
Press
Menu/Set.
3
Press Stop/Exit.
Changing the default black & white file format
1
Press Menu/Set, 4, 8, 2.
2
Press ▲ or ▼ to select TIFF or PDF.
Press
Menu/Set.
3
Press Stop/Exit.
Changing the default colour file format
1
Press Menu/Set, 4, 8, 3.
2
Press ▲ or ▼ to select PDF or JPEG.
Press
Menu/Set.
3
Press Stop/Exit.
To Next Page
Loading...
Need help?
General
