Brother MFC-640CW User Manual

1 - 3 INTRODUCTION
6
Copy Options
You can quickly and easily select
temporary settings for copying.
7
Fax Resolution
Adjusts the resolution when you
send a fax.
8
Mono Start
Lets you start sending faxes or
make copies in black and white.
Also lets you start a scanning
operation (in colour or mono,
depending on the scanning setting
in the ControlCenter2 software).
9
Colour Start
Lets you start sending faxes or
make copies in full colour.
Also lets you start a scanning
operation (in colour or mono,
depending on the scanning setting
in the ControlCenter2 software).
0
Stop/Exit
Stops an operation or exits from the
menu.
A
Power Save
Lets you put the machine into Power
Save mode.
B
Navigation keys:
Menu/Set
The same key is used for Menu and
Set operations.
Lets you access the Menu to
program and store your settings in
the machine.
You can press these keys to adjust
the volume.
▲ Search/Speed Dial
Lets you look up numbers that are
stored in the dialling memory. It also
lets you dial stored numbers by
pressing # and a two-digit number.
Press to scroll backward to a menu
selection.
▲ or ▼
Press to scroll through the menus
and options.
C
LCD (Liquid Crystal Display)
Displays messages on the screen to
help you set up and use your machine.
When the machine is connected to a
wireless network a four level
indicator on the right of the LCD
shows the wireless signal strength.
oMax
▲

Brother MFC-640CW Specifications

General

Brand	Brother
Model	MFC-640CW
Category	Fax Machine
Language	English