Brother MFC-7420

Appendix B
B - 8
5. LAN
(MFC-7820N
only)
1. Setup
TCP/IP
1. BOOT Method Auto
Static
RARP
BOOTP
DHCP
You can choose the
BOOT method that best
suits your needs.
See
Network
User’s
Guide
on the
CD-ROM
2. IP Address [000-255].
[000-255].
[000-255].
[000-255]
Enter the IP address.
3. Subnet Mask [000-255].
[000-255].
[000-255].
[000-255]
Enter the Subnet mask.
4. Gateway [000-255].
[000-255].
[000-255].
[000-255]
Enter the Gateway
address.
5. Node Name BRN_XXXXXX Enter the Node name.
6. WINS Config Auto
Static
You can choose the WINS
configuration mode.
7. WINS Server
(Primary)
000.000.000.000
(Secondary)
000.000.000.000
Specifies the IP address of
the primary or secondary
WINS server.
8. DNS Server
(Primary)
000.000.000.000
(Secondary)
000.000.000.000
Specifies the IP address of
the primary or secondary
DNS server.
9. APIPA On
Off
Automatically allocates
the IP address from the
link-local address range.
2. Setup Misc. 1. Ethernet Auto
100B-FD
100B-HD
10B-FD
10B-HD
Selects Ethernet link
mode.
0. Factory
Reset
— — Restore all network
settings to factory default.
Main Menu Submenu Menu Selections Options Descriptions Page
Note
The factory settings are shown in Bold.
to exitSelect & Set Select & Set to accept