156
Reset C
The following reset functions are available:
1 Network
You can reset the print server back to its
default factory settings such as the
password and IP address information.
2 Address & Fax
Address & Fax resets the following
settings:
Address Book
(One-Touch Dial, Speed-Dial and
Setup Groups)
Programmed fax jobs in the memory
(Polled Transmit, Delayed Polling,
Secure Polling, Delayed Fax and
Delayed Batch)
Station ID (Name and Number)
Coverpage Msg (Comments)
Remote Fax Options
(Remote Access Code, Fax Storage,
Fax Forwarding and PC-Fax)
Report settings
(Transmission Verification Report, Tel
Index List and Fax Journal)
Setting Lock password
3 All Settings
You can reset all the machine settings
back to the settings that were set at the
factory.
Brother strongly recommends you
perform this operation when you dispose
of the machine.
Note
Unplug the interface cable before you
choose Network or All Settings.
How to reset C
a Press Menu, 0, 7.
b Press a or b to choose the reset you
want.
Press OK.
c Choose 1.Reset or 2.Exit.
d If you choose 1.Reset in step c, you
will be asked to reboot the machine.
Choose 1.Yes or 2.No. If you choose
1.Yes, the machine will begin the
Reset.
Note
You can also reset the Network settings
by pressing Menu, 7, 0.
Downloaded from ManualsPrinter.com Manuals
To Next Page
Loading...
Need help?
General
Weight and Dimensions
