Brother MFC-8370DN

Chapter 6
50
Fax Detect 6
If Fax Detect is On:
The machine can receive a fax automatically,
even if you answer the call. When you see
Receiving on the LCD or hear a click on the
phone line through the handset you are
using, just replace the handset. Your
machine will do the rest.
If Fax Detect is Off:
If you are at the machine and answer a fax
call by lifting an external handset, press
Start, then press 2 to receive the fax.
If you answered at an extension telephone,
press l51. (See Operating from external and
extension telephones on page 57)
Note
• If this feature is set to On, but your
machine does not connect a fax call when
you lift an extension or external telephone
handset, press the remote activation code
l51.
• If you send faxes from a computer on the
same telephone line and the machine
intercepts them, set Fax Detect to Off.
a Make sure you are in Fax mode .
b Press Menu, 2, 1, 3.
c Press a or b to choose On or Off.
Press OK.
d Press Stop/Exit.
Setting the Print Density 6
You can adjust the Print Density setting to
make your printed pages darker or lighter.
a Make sure you are in Fax mode .
b Press Menu, 2, 1, 7.
c Press a to make the print darker.
Or, press b to make the print lighter.
Press OK.
d Press Stop/Exit.
Downloaded from ManualsPrinter.com Manuals