Chapter 2
20
Loading documents 2
Using the automatic
document feeder (ADF) 2
The ADF can hold up to 20 pages of A4 size
paper and feeds each sheet individually. Use
standard 80 g/m
2
paper and always fan the
pages before putting them in the ADF.
Recommended environment 2
IMPORTANT
• DO NOT leave thick documents on the
scanner glass. If you do this, the ADF may
jam.
• DO NOT use paper that is curled,
wrinkled, folded, ripped, stapled, paper-
clipped, pasted or taped.
• DO NOT use cardboard, newspaper or
fabric.
• To avoid damaging your machine while
using the ADF, DO NOT pull on the
document while it is feeding.
Note
To scan documents that are not suitable
for the ADF see Using the scanner glass
on page 21.
Make sure documents written with ink are
completely dry.
Documents to be faxed must be from 148
to 215.9 mm wide and from 148 to
355.6 mm long, and of a standard weight
[80 g/m
2
].
a Unfold the ADF output tray (1).
b Fan the pages well.
c Place your document face down, top
edge first in the ADF until you feel it
touch the feed roller.
Note
Remove all printed documents from the
ADF output tray before placing any new
documents in the ADF.
d Adjust the paper guides (1) to fit the
width of your document.
Temperature: 20 to 30° C
Humidity: 50% - 70%
Paper: Xerox Premier TCF 80 g/m
2
or Xerox
Business 80 g/m
2
1
1
Downloaded from ManualsPrinter.com Manuals
To Next Page
Loading...
Need help?
General
Weight and Dimensions
