Sending a fax
41
5
Cancelling a Broadcast in
progress 5
While broadcasting you can cancel the fax
currently being sent or the whole broadcast
job.
a Press Menu, 2, 7.
The LCD will display the Broadcast job
number followed by the fax number
being dialled (for example,
#001 0123456789) and the broadcast
job numbers (for example,
Broadcast#001).
b Press a or b to choose to cancel the fax
being sent or the Broadcast job number.
Press OK.
c Press 1 to clear the job number or 2 to
exit.
If you chose to only cancel the fax
currently being sent in step b, the
machine will ask you if you want to
cancel the broadcast. Press 1 to clear
the whole broadcast job or 2 to exit.
d Press Stop/Exit.
Additional sending
operations 5
Sending faxes using multiple
settings 5
Before you send a fax, you can change any
combination of these settings: Contrast,
Resolution, Overseas mode, Delayed fax
timer, Polling transmission, Real time
transmission or Cover page settings.
a Make sure you are in Fax mode .
After each setting is accepted, the LCD
asks if you want to enter more settings.
Next
1.Yes 2.No
b Do one of the following:
To choose more settings, press 1.
The LCD returns to the Setup Send
menu so you can choose another
setting.
If you have finished choosing
settings, press 2 and go to the next
step for sending your fax.
Downloaded from ManualsPrinter.com Manuals
To Next Page
Loading...
