Brother MFC-8370DN - Control Panel Overview

Chapter 1
6
Control panel overview 1
MFC-8370DN and MFC-8380DN have the same keys.
1 One Touch keys
These 8 keys give you instant access to 16
previously stored numbers.
Shift
Lets you access One Touch numbers 9 to 16
when held down.
2 Fax and telephone keys:
Tel/R
This key is used to have a telephone
conversation after picking up the external
handset during the F/T pseudo-ring.
When connected to a PBX, you can use this
key to gain access to an outside line, to recall
an operator, or to transfer a call to another
extension.
Resolution
Sets the resolution when sending a fax.
Redial/Pause
Redials the last number called. It also inserts a
pause when programming quick dial numbers
or when dialling a number manually.
3LCD
Displays messages to help you set up and use
your machine.
4 Data LED
The LED will flash depending on the machine
status.
5 Menu keys:
Menu
Lets you access the Menu to program your
settings in this machine.
Clear/Back
Deletes entered data or lets you cancel the
current setting.
OK
Lets you store your settings in the machine.
Volume Keys
d or c
Press to scroll backwards or forwards through
menu selections. Press to change the volume
when in fax or standby mode.
a or b
Press to scroll through the menus and options.
Lets you look up numbers stored in memory. It
also lets you access speed dial numbers
directly if you press , and then enter a three
digit number.
Downloaded from ManualsPrinter.com Manuals