Brother MFC-8870DW - Remote Setup; Types of Network Connections; Network Connection Example; Peer-To-Peer Printing Using TCP;IP

Introduction
3
1
Remote Setup
The Remote Setup software allows you to configure network settings from a Windows
®
or Macintosh
®
(Mac
OS
®
X 10.2.4 or greater). (See Chapter 5 for Windows
®
and Chapter 11 for Macintosh
®
of the Software User’s
Guide on the CD-ROM).
Types of Network Connections
Network Connection Example
Peer-to-Peer printing using TCP/IP
In a Peer-to-Peer environment, each computer directly sends and receives data to each device. There is no
central server controlling file access or printer sharing.
■ In a smaller network of 2 or 3 computers, we recommend the Peer-to-Peer printing method as it is easier
to configure than the Network Shared Printing method described on the following page. See Network
Shared Printing on page 4.
■ Each computer must use the TCP/IP Protocol.
■ The Brother machine needs an appropriate IP address configuration.
■ If you are using a router, the Gateway address must be configured on the computers and the Brother
machine.
TCP/IPTCP/IP
Windows
R
Windows
R
Windows
R
Network printer (your machine)
Switch or
Router