Wireless configuration for Macintosh
®
61
5
Configuration in Ad-hoc Mode
For Mac OS
®
X 10.2.4 or greater
Important
If you have previously configured the wireless settings of the machine, you must reset the network LAN
settings before you can configure the wireless settings again. Press Menu, 6, 0, 1 and select 1. Yes to
accept the change. The machine will restart automatically.
1
Turn on the machine. Press Menu, 6, 2, 5. Using ▲ or ▼, select On and press OK.
2
Turn on your Macintosh
®
.
3
Put the supplied CD-ROM into your CD-ROM drive.
4
Double-click the Utilities icon and then Wireless
LAN Setup Wizard.
5
Read the Important Notice and click Next.
62.WLAN
5.WLAN Enable
On
Off
Select ▲ ▼ & OK
To Next Page
Loading...
