Wireless configuration for Windows
®
41
4
8
Ensure the on-screen message and click Next.
9
Temporarily place the machine within a 5 m/16 feet
range from the access point.
10
Refer to the instruction manual that came with your access point to set the SecureEasySetup
TM
mode
of your access point.
11
Put the machine in SecureEasySetup
TM
mode. Press 6, 2, 2, 2, for SecurEasySetup and press OK.
Note
• It will take approximately one minute for the LAN menu on the LCD to become available after the
machine restarts or is turned on.
• If the LCD shows Connection Error, please try again.
To Next Page
Loading...
