42 Chapter 6
Switching OFF Memory Security
1
When Memory Security is switched ON, press
Menu/Set.
2
Enter a 4-digit password and press Menu/Set.
The screen displays ACCEPTED, then after 2 seconds the display reverts to normal. Memory
Security is now switched OFF. Then all the data saved in the memory will be printed out.
If you forget the Memory Security password, please contact your Brother dealer for service or the
help number given with the warranty documentation.
If the password you enter at Step 2 is incorrect, the screen would display WRONG
PASSWORD. After 2 seconds the display will then return to displaying SECURE
MODE. You must then start from Step 1 to switch OFF Memory Security.
PASSWORD:XXXX
ENTER & SET KEY
To Next Page
Loading...
