Brother MFC-9180 - User Manual

Other manuals for Brother MFC-9180

Brochure & Specs4 pages

Quick Setup Guide4 pages

Questions and Answers:

J
jaredlopezAug 26, 2025
How to resolve 'OUT OF MEMORY' error on Brother All in One Printer when printing?
- M
  Michelle HarperAug 26, 2025
  If your Brother All in One Printer displays an 'OUT OF MEMORY' error when used as a printer, the machine memory capacity has been exceeded. If you have installed the Windows® driver, try again after setting the True Type mode to 'Print as Graphics' in the PRINT menu of your application software. Reduce the print resolution or reduce the complexity of your document.
D
david19Aug 27, 2025
Why is my Brother MFC-9180 All in One Printer not printing?
- I
  Ian Martin DDSAug 27, 2025
  Make sure the Brother All in One Printer is plugged in, the toner cartridge and drum unit are installed properly, and the interface cable is securely connected between the machine and computer. Check to see if LCD is showing an error message.
A
Andrea DayAug 27, 2025
Why can't my Brother MFC-9180 All in One Printer print full pages and shows an 'OUT OF MEMORY' error?
- U
  umartinezAug 28, 2025
  Reduce the printer resolution on your Brother All in One Printer. Reduce the complexity of your document and try again. Reduce the graphic quality or the number of font sizes within your application software.
C
Christine NguyenAug 28, 2025
Why does my Brother All in One Printer say 'CHECK PAPER'?
- J
  Jeremy SuttonAug 28, 2025
  The 'CHECK PAPER' message on your Brother All in One Printer indicates that the machine is either out of paper or the paper is not loaded correctly in the Multi-purpose Sheet Feeder. To resolve this, refill the paper or remove the paper and load it again, and then press Fax Start.
J
Jennifer TaylorAug 29, 2025
What to do if my Brother MFC-9180 says 'PLS OPEN COVER'?
- A
  Anthony PollardAug 29, 2025
  If your Brother All in One Printer displays 'PLS OPEN COVER', it indicates that a page, a piece of paper, a paper clip, or another object may be jammed inside the machine. Open the top cover and remove the drum unit. If you see any jammed paper or other item, gently pull it out. Reinstall the drum unit, then close the top cover.
M
Mrs. Jessica BrightAug 30, 2025
How do I fix 'COVER OPEN PLS CLOSE COVER' error on my Brother MFC-9180?
- D
  David CamachoAug 30, 2025
  The 'COVER OPEN PLS CLOSE COVER' error on your Brother All in One Printer means that the top cover was not completely closed. To fix this, open the cover and then close it securely.
K
Kevin MillerAug 23, 2025
What to do if my Brother MFC-9180 says 'CHANGE TONER'?
- M
  Mark FletcherAug 23, 2025
  If your Brother All in One Printer's display shows 'CHANGE TONER', you can continue printing for a short time. However, this message indicates that the toner is low and will soon run out. You should order a new toner cartridge now.
K
Katrina StevensonSep 1, 2025
What to do if my Brother All in One Printer says 'DOC. COVER OPEN'?
- W
  williamsmichaelSep 1, 2025
  If your Brother All in One Printer displays 'DOC. COVER OPEN', it means that the document cover is open. Remove any paper from the ADF and close the document cover to resolve this.
G
gcampbellSep 2, 2025
Why does my Brother MFC-9180 All in One Printer say 'COOLING DOWN WAIT FOR A WHILE'?
- Y
  Yolanda WilsonSep 2, 2025
  The message 'COOLING DOWN WAIT FOR A WHILE' on your Brother All in One Printer indicates that the temperature of the drum unit or toner cartridge is too high. You must wait and allow the machine to resume printing when it is ready.
K
kevinnguyenSep 3, 2025
What does 'CHECK PAPER SIZE' mean on my Brother All in One Printer?
- K
  kenneth03Sep 3, 2025
  The 'CHECK PAPER SIZE' message on your Brother All in One Printer indicates that the paper size is improper for fax receiving. Load A4 paper in multi-purpose sheet feeder, and then press Fax Start.