What to do if my Brother Fax Machine says 'CHECK PAPER'?
If your Brother Fax Machine displays 'CHECK PAPER', it means the machine is out of paper, or the paper isn't loaded correctly. Refill the paper tray or remove the paper and load it again, ensuring it's properly aligned.
What to do if my Brother Fax Machine displays 'CHECK PAPER SIZE'?
If your Brother Fax Machine displays 'CHECK PAPER SIZE', it means the paper size is not suitable for fax receiving. Load A4 paper into the tray.
Why is my Brother Fax Machine not printing?
Make sure your Brother Fax Machine is plugged in, the toner cartridge and drum unit are installed properly, and the interface cable is securely connected between the machine and computer. Check the LCD for any error messages.
Why does my Brother MFC-9660 say 'CHANGE TONER'?
The 'CHANGE TONER' message on your Brother All in One Printer, along with the Toner Empty LED flashing, indicates that the toner cartridge is depleted. You can still print for a short time, but it's recommended to order a new toner cartridge.
What to do if my Brother MFC-9660 All in One Printer says 'CHECK PAPER'?
If your Brother All in One Printer displays 'CHECK PAPER', it means the printer is either out of paper or the paper is not loaded correctly in the tray. Refill the paper or remove the paper and load it again properly.
What does 'PLS CLEAN DRUM' mean on my Brother MFC-9660 All in One Printer?
The 'PLS CLEAN DRUM' message on your Brother All in One Printer means that the primary corona wire of the drum unit is dirty. Clean the primary corona wire of the drum unit.
What to do if my Brother MFC-9660 All in One Printer does not print?
First, ensure that your Brother All in One printer is plugged in and that both the toner cartridge and drum unit are installed correctly. Also, verify that the interface cable is securely connected between the machine and your computer. Finally, check the LCD for any error messages.
What does 'CHANGE DRUM SOON' mean on my Brother Fax Machine?
The 'CHANGE DRUM SOON' message on your Brother Fax Machine indicates that the drum unit is nearing the end of its life. If you're experiencing print quality issues, replace the drum unit with a new one. Also, ensure that the drum counter was reset by opening the front cover and pressing Clear, then pressing 1 to reset.
Why is my Brother Fax Machine printing with toner scattered on the page?
If your Brother Fax Machine is printing with toner scattered and staining the page, try adjusting the print density settings. Also, clean the inside of the machine and ensure you are using paper that meets the device’s specifications.
What to do if my Brother Fax Machine displays 'OUT OF MEMORY' when printing?
If your Brother Fax Machine shows 'OUT OF MEMORY' while printing, press the Reset button to clear the machine's memory. If you're using the Windows driver, set the True Type mode to “Print as Graphics” in your application's PRINT menu. Alternatively, reduce the print resolution or document complexity. You can also expand the printer memory with an optional memory board.
General| Brand | Brother |
|---|---|
| Model | MFC-9660 |
| Category | All in One Printer |
| Language | English |
Provides instructions for sending faxes via automatic transmission and cover page methods.
Describes the four different receive modes for handling incoming calls.
Provides guidelines for inserting documents into the ADF, including size and condition.
Instructions on safely connecting the power cord to the machine and outlet.
Steps and diagram for connecting an external telephone answering device.
Instructions on how to connect an external or extension telephone to the machine.
Explains how to access and navigate the machine's menu system.
A table detailing menu options, selections, and their descriptions for programming.
Covers setting the date, time, and station ID for the machine.
Describes how to adjust custom settings like ring, beeper, and speaker volume levels.
Steps to store numbers for one-touch and speed dialling.
Covers adjusting contrast and fax resolution for optimal sending.
Explains One Touch Dialling, Speed Dialling, Search, and Chain Dialling.
How to send faxes immediately, bypassing memory transmission.
Explains the four different modes for receiving faxes: FAX, FAX/TEL, TAD, MANUAL.
Initial setup for Transmission Report and Journal Period.
Setting up and customizing electronic and next-fax-only cover pages.
Cancelling jobs and setting up memory security for the machine.
Answering calls and transferring faxes using external or extension telephones.
Enabling remote activation and changing remote access codes.
Introduction to polling and using secure codes for data protection.
Setting up standard/secure polling receive and delayed/sequential polling.
Setting up the machine to send documents for polling.
Enabling fax storage for retrieval and setting up fax forwarding.
Changing the remote access code and retrieving faxes remotely.
Commands for remotely controlling fax forwarding, retrieval, and status.
How to use the machine as a copier for single and multiple copies.
Introduction to special printing features and PC printing.
Overview of the printer driver software and its features.
Introduction to the Control Centre software and AutoLoad function.
Converting image text to editable text using OCR.
Overview of PC-FAX setup, software, and remote configuration.
Sending files as PC-FAX and setting up user information.
Configuring the PC to receive faxes directly.
Setting up a Macintosh and installing the printer driver.
Sending faxes directly from Macintosh applications.
Using the TWAIN scanner driver on Macintosh.
Common error messages and their causes and actions.
Troubleshooting steps for PAPER JAM and TONER EMPTY errors.
Procedures for clearing document and paper jams from the machine.
Troubleshooting common difficulties with fax operation and phone lines.
Step-by-step guide for replacing the toner cartridge.
Step-by-step guide for replacing the drum unit.
Comprehensive safety guidelines for product operation and handling.
Technical specifications for general operation and fax functions.
Technical specifications related to the printer functionality.
To Next Page
