139
9
9
Scanning a document using the TWAIN driver 9
The Brother machine software includes a TWAIN Scanner driver for Macintosh. You can use this Macintosh
TWAIN Scanner driver with any applications that support TWAIN specifications.
When you scan a document, you can either use the ADF (automatic document feeder) or the Flatbed scanner
glass. For more information on loading the documents, see Using the ADF (ADF models only) and Using the
scanner glass in the Basic User’s Guide.
If you want to scan from a machine on a network, choose the networked machine in the Device Selector
application located in Macintosh HD/Library/Printers/Brother/Utilities/DeviceSelector or from the
Model pop-up menu of ControlCenter2.
Accessing the TWAIN driver 9
Run your Macintosh TWAIN-compliant application. The first time you use the Brother TWAIN driver, set it as
the default driver by choosing Select Source (or another menu name for choosing the default driver). For
each document you scan after this, choose Acquire Image Data or Start. The scanner setup dialog box
appears.
The method of choosing the default driver or scanning a document may vary depending on the application
you are using.
Scanning 9
To Next Page
Loading...
Need help?
General
