Chapter 2
20
f Gently adjust the paper guides (1) to fit
the paper.
Make sure the paper guides touch the
sides of the paper.
g Close the output paper tray cover.
Loading paper in paper
tray #2 (MFC-J4610DW) 2
• You can only use plain paper sizes Letter
or A4 in Tray #2.
• For more information about paper
orientation, see Paper orientation and
capacity of the paper trays on page 32.
a Pull the paper tray completely out of the
machine.
b Gently press and slide the paper
guides (1) to fit the paper size.
Make sure that the triangular mark (2)
on the paper guide (1) lines up with the
mark for the paper size you are using.
c Fan the stack of paper well to avoid
paper jams and misfeeds.
Always make sure that the paper is not
curled.
1
1
2
To Next Page
Loading...
Need help?
General
