Brother MFC-J4310DW Basic User's Guide

55
7
7
How to dial 7
Manual dialing 7
a Load your document.
b Press (Fax).
c Press all of the digits of the fax number.
d Press Fax Start.
Speed Dialing 7
a Load your document.
b Press (Fax).
c Press (Address).
d Do one of the following:
 Press Alphabetical or
Numerical, and then press the
number you want to dial.
 Press the 2-digit Speed Dial number
using the dial pad.
NOTE
If the Touchscreen shows
Not Registered when you enter a
Speed Dial number it means a number
has not been stored at this location.
e
To send a fax, press Send a fax and
go to step f.
f Press Fax Start.
The machine scans and sends the fax.
Fax Redial 7
If you are sending a fax automatically and the
line is busy, the machine will redial once after
five minutes.
Redial only works if you dialed from the
machine.
a Load your document.
b Press (Fax).
c Press Redial.
d Press Fax Start.
NOTE
• In Real Time Transmission the automatic
redial feature does not work when you are
using the scanner glass.
• If you are sending a fax manually and the
line is busy, press Hook before performing
step c above.
• Redial will change to Pause when you
enter a fax number.
Dialing and storing numbers 7

Brother MFC-J4310DW Specifications

General

Brand	Brother
Model	MFC-J4310DW
Category	All in One Printer
Language	English