Loading documents
35
3
c Adjust the paper guides (1) to fit the
width of your document.
d Place your document face down, top
edge first in the ADF underneath the
guides until you feel it touch the feed
rollers and the Touchscreen shows
ADF Ready.
DO NOT leave a thick document on the
scanner glass. If you do this, the ADF may
jam.
Using the scanner glass 3
You can use the scanner glass to fax, copy or
scan pages of a book or one page at a time.
Document Sizes Supported 3
How to load documents 3
(MFC-J4410DW and MFC-J4610DW)
To use the scanner glass, the ADF must
be empty.
a Lift the document cover.
b Using the document guidelines on the
left and top, place the document
face down in the upper left corner of the
scanner glass.
1 document cover
c Close the document cover.
If you are scanning a book or thick
document, DO NOT slam the cover down
or press on it.
Length: Up to 11.7 in. (297 mm)
Width: Up to 8.5 in. (215.9 mm)
Weight: Up to 4.4 lb (2 kg)
To Next Page
Loading...
Need help?
General
