Chapter 4
38
d Enter the fax number.
Using the dial pad
Using (Address)
Address Book
Using (History)
Outgoing
Incoming
e Press Fax Start.
Faxing from the ADF
(MFC-J4410DW and
MFC-J4610DW)
4
The machine starts scanning and
sending the document.
Faxing from the scanner glass 4
If you choose Black in the
Color Setting (default setting),
the machine starts scanning the first
page. Go to step f.
If you choose Color in the
Color Setting, the Touchscreen
asks if you want to send a color fax.
Press Color Fax to confirm. The
machine starts dialing and sending
the document.
f When the Touchscreen asks you
Next Page?, do one of the following:
To send a single page, press
No (Send).
The machine starts sending the
document.
To send more than one page, press
Yes and go to step g.
g Place the next page on the scanner
glass.
Press OK.
The machine starts scanning the page.
(Repeat steps f and g for each
additional page.)
Stop faxing 4
To stop faxing, press .
Setting scanner glass size
for faxing 4
When documents are A4 size, you need to
set the Scan Size to A4. If you do not, the
bottom portion of the faxes will be missing.
a Load your document.
b Press (Fax).
c Press Options.
d Press s or t on the Touchpanel to
display Glass Scan Size.
e Press Glass Scan Size.
f Press A4 (or Letter).
g Press OK.
h Enter the fax number.
i Press Fax Start.
• You can save the setting you use most
often by setting it as the default setting.
(See Advanced User’s Guide: Setting
your changes as the new default.)
• This setting is only available for sending
documents from the scanner glass.
To Next Page
Loading...
Need help?
General
